APP Modifide Asphalt Waterproof Material

INTRODUCTION The products are made by soaking the base in bitumen,or thermoplas ticiyelastomer (such as styrene butadiene-SBS),or thermoplastics (such as atactic polypropylene-APP,APAO.APAL)modifiled biumen,then covering double faces with wlastomer(SBS)or thermoplastics (APP,APAO,APAL)modified bitumen,and last finishing the upward face with fine sands,mineral slates (or geains)or polythene membrane etc.While downward face with fine sands or polythene membrane.CHARACTERISTICS It has good waterproofing and ageing-resistance function,not flowing at highest temperature and no crack at lowest temperature;easy app;ication,no pollution,and long service life,etc.SBS modified bitumen waterproof membrane is specially suitable to the building waterproofing in cold area and to the buildings of changeable constructions,while APP specially suitable to high temperature and of atrong sun-shining.APPLICATION METHODMake sure the roof deck smooth,and dry (moisture‹9%),then apply the surface of roof deck homogeneously with a kind bitumen paint,till dry to start application.There are two methods in application. a) One way is by heating and melting method.Heat the polyethylene film of the membrane and roof deck surface by heating and melting method to be nearly melted (not flowing),then install the membrane filly bonded to the roof deck with overlaps of 5-10cm. b) The other way is by cold adhesive method.Pour the cold adhesive homogeneously on the roof deck, then roll the membrane to install it to be fully sticked to roof deck. By heating and melting method and by cold adhesive can be used in alternation in application as requested.c)After application,a full serious inspection is required to sure no air bubble,no falling away.etc. to guarantee the waterproof life.SPECIFICATIONNO.BASEPYGTYREIIIIII1Soluble content g/m²2mm---13003mm21004mm29002ImpermeabilityPressure .Mpa ≤0.30.20.3Keeping time.min ≤303Heat resistance,°c110130110130no slippering,no flowing ,no dripping4Tension,N/50mm ≥Longitudinal450800350500transverse2503005Fracture elongation, %≥Longitudinal2540---transverse6Cold flexibility,°c-5-15-5-15No crack7Tear resistance,N≥Longitudinal250350250350transverse1702008Phytotrons accelerating ageingAppearanceFirst lassTension keeping %≥Longitudinalno slippering,no flowing ,no dripping80-3-10-3-10Cold flexibility,°cNo crack